Skip header
 

Preset Reduce / Enlarge

This function allows you to reduce or enlarge images by selecting a preset ratio.

You can register up to two frequently used reproduction ratios other than the preset reduce/enlarge ratios.

Illustration of Preset Reduce / Enlarge

1Press [Reduce/ Enlarge].

Operation panel screen illustration

2Select a ratio, and then press [OK].

3Place the originals, and then press the [Start] key.

Note

  • You can also select a preset ratio on the initial screen, by pressing the shortcut key.

  • You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.

  • For details about the base point, see Reducing or Enlarging Originals.

  • You can change reproduction ratios shown on the initial screen under [Reproduction Ratio] in User Tools. For details, see "Reproduction Ratio", Preparation.