Skip header
 

Staple position

The specified staple position varies depending on paper feed and print data orientation. The following table shows the staple positions:

Paper Orientation on the Machine

Print Data Direction

Staple Position

Finisher SR5090/SR5110

Booklet Finisher SR5100/SR5120

Illustration of paper orientation

Illustration of paper orientation

Portrait

Illustration of staple position

Illustration of staple position

Landscape

Illustration of staple position

Illustration of staple position

Note

  • Stapling might not be in the specified position if combine and two-sided printing are both selected. After setting the staple position, use the printer driver's preview icon to check the position before printing.

  • When center staple is set, the fore edge of prints can be cut using the trimmer. For details about cutting the fore edges of prints, see the printer driver Help.

  • Empty the trimmer tray if prints are ejected with waste paper stuck to them.

PreviousNext