Skip header
 

Specifying the classification code for a print job

When printing in an environment where classification codes are required, a classification code must be specified for each print job. This function is available for the PCL 6 printer driver.

Important

  • The specified classification code is stored in the printer driver.

  • To switch between different classification codes, install the printer driver under different names, and specify different classification code for each driver.

When using the PCL 6 printer driver

1Click the menu button of the application you are using, and then click [Print].

2Select the printer you want to use.

3Click [Preferences].

4Click the [Detailed Settings] tab.

5In the "Menu:" box, click [Job Setup].

6Enter the classification code in the "Classification Code:" box.

7Change any other print settings if necessary.

8Click [OK].

9Start printing from the application's [Print] dialog box.

Note

  • When [Document Server] is selected in the "Job Type:" list, the classification code cannot be entered.

  • If you are printing on a registered custom paper, make the correct paper settings for the custom paper on the printer driver. For details about custom paper, see "Registering a Custom Paper", Preparation.