Adjust Print Position

Use this function to move (shift) the copy image up, down, left, or right to create a margin. You can also shift in a combination of up/down and right/left.

Using this function allows you to adjust the position of an image in the following two directions:

  • [] (Top), [] (Bottom)
    Shifts towards the leading or trailing edge of the paper.
    Illustratin of Adjust Print Position

  • [] (Left), [] (Right)
    Shifts towards the left or right of the paper.
    Illustratin of Adjust Print Position

  1. Press [Adjust Print Position].
    Operation panel screen illustration

  2. Specify the right position using [] or [].

  3. Specify the bottom position using [] or [].

  4. Press [OK].

Note

  • You can shift the image from 0 to 200 mm (0.0 to 7.9 inches) in 1 mm (0.1 inches) increments.

  • When using Stamp and Adjust Print Position together, the stamp position does not move.

  • If you specify the margin too long for the original, parts of the image might not be copied.

  • You can change the settings for Adjust Print Position under [Adjust Print Position] of [Copier / Document Server Settings]. For details, see User Guide of your device.

x

QR Code