Image Repeat

The original image is copied repeatedly.

Illustration of Image Repeat

There are two ways to specify an image to be repeated.

Whole Area Repeat

Repeatedly copies the entire image.

Specified Area Repeat

Repeatedly copies a specified area of the image.

Note

  • Depending on the paper size, ratio, and orientation, parts of repeated images may not be copied.

  • You can change the settings for Image Repeat in the following settings. For details, see User Guide of your device.

    • Settings screen type: Standard
      [Copier / Document Server Settings] [Edit / Stamp] [Edit Image]

    • Settings screen type: Classic
      [Copier / Document Server Settings] [Edit]

Whole Area Repeat

Repeatedly copies the entire image.

The number of repeated images depends on the original size, paper size, and reproduction ratio. For example, see the following tables:

Original sizes paper sizes

4 repeats (71%)

16 repeats (35%)

A5Portrait A4Portrait

A5Landscape A4Landscape

51/2 × 81/2Portrait 81/2 × 11Portrait

51/2 × 81/2Landscape 81/2 × 11Landscape

Illustration of Image Repeat

Illustration of Image Repeat

Original sizes paper sizes

2 repeats (100%)

8 repeats (50%)

32 repeats (25%)

A5Portrait A4Landscape

A5Landscape A4Portrait

51/2 × 81/2Portrait 81/2 × 11Landscape

51/2 × 81/2Landscape 81/2 × 11Portrait

Illustration of Image Repeat

Illustration of Image Repeat

Illustration of Image Repeat


  1. Press [Edit / Color].
    Operation panel screen illustration

  2. Press [Edit Image].

  3. Press [Image Repeat].

  4. Make sure that [Whole Area] is selected, and then press [OK].

  5. Press [OK].

  6. Select the size of copy paper and the reproduction ratio.

Section Top

Specified Area Repeat

Repeatedly copies a specified portion of the image.

Color printers:

To specify the area you want to repeat, you have to define the value of X1, Y1, X2, and Y2 on the original. Measure the area you want to specify before entering the area settings.

Illustration of Image Repeat

The values are entered as follows:

X1: 0–412 mm (0.0–16.2 inches)

X2: 20–432 mm (0.8–17.0 inches)

Y1: 0–277 mm (0.0–10.8 inches)

Y2: 20–297 mm (0.8–11.6 inches)

Important

  • You cannot use this function from the ADF.

  1. Measure the length from the base point to the area that you want to copy repeatedly (X1, Y1) and the length and width of the area (X2, Y2).

  2. Press [Edit / Color].
    Operation panel screen illustration

  3. If [Margin Adj.] is selected, press [Margin Adj.] to cancel it.

  4. Press [Edit Image].

  5. Press [Image Repeat].

  6. Press [Specified Area].

  7. Enter the length of [X1] with number keys, and then press [Sharp].
    Operation panel screen illustration

  8. Enter the length of [Y1] with the number keys, and then press [Sharp].

  9. Enter the length of [X2] with the number keys, and then press [Sharp].

  10. Enter the length of [Y2] with the number keys, and then press [Sharp].

  11. Press [OK] twice.

  12. Select the size of copy paper and the reproduction ratio.

Section Top

x

QR Code