Margin Adjustment

Copies an original so that a binding margin is created.

Illustration of Margin Adjustment

  1. Press [Edit / Color].
    Operation panel screen illustration

  2. Press [Margin Adj.].
    Operation panel screen illustration

  3. Specify a binding margin for the front side pages.
    Operation panel screen illustration

  4. Specify a binding margin for the back side pages.
    Margin on the back side of the page is valid when [1 Sided → 2 Sided] or [Combine 2 Sides] is selected.
    If you do not need to specify the margins for the back side pages, proceed to Step 5.

  5. Press [OK].

Note

  • You can specify the binding margin up to 30 mm (1.2 inches) in 1 mm (0.1 inches) increments.

  • Press [] and [] to specify the top or bottom position. Press [] and [] to specify the left or right position.

  • If you specify a binding margin that is too wide, part of the image may not be copied.

  • When making copies in Combine mode, the binding margin is added to the copies after the combination is finished.

  • You can change the settings for Margin Adjustment in the following settings. For details, see User Guide of your device.

    • Settings screen type: Standard
      [Copier / Document Server Settings] [Edit / Stamp] [Margin]

    • Settings screen type: Classic
      [Copier / Document Server Settings] [Edit]

x

QR Code