Creating a New Scan Profile

On the [Start] menu, click [Control Panel].
Click [Hardware and Sound].
You do not have to perform this step depending on the Control Panel settings.
Click [Devices and Printers].
When using Windows Vista, click [Scanners and Cameras].
Right-click the icon for this machine, and then click [Scan profiles...].
When using Windows Vista, select this machine, and then click [Scan Profiles].
Click [Add...].
Configure the necessary settings for the profile.
Enter a profile name in the [Profile name:] box.
Click [Save Profile].

Note

You can register multiple profiles. If multiple profiles are registered, the profile specified as default in the [Scan Profiles] dialog box is applied.
To specify a scan profile as the default profile, perform one of the following procedures:
- In the [Scan Profiles] dialog box, click the scan profile, and then click [Set as Default].
- After you create a new scan profile, in the [Add New Profile] dialog box, select the [Set this profile as default] check box.

The following table tells you the scan profile settings that you can configure.

Scan Profile Items and Settings

Item	Scan settings
Scanner:	Select this machine.
Profile name:	Enter the profile name.
Source:	Select one of the following: Flatbed Feeder (Scan one side) Feeder (Scan both sides) If the original is placed on the exposure glass, select [Flatbed]. If the original is placed in the ADF, select [Feeder (Scan one side)] or [Feeder (Scan both sides)].
Paper size:	If you select [Feeder (Scan one side)] or [Feeder (Scan both sides)] in [Source:], you must specify the paper size.
Color format:	Select one of the following: Color Grayscale Black and white
File type:	Select one of the following: BMP (Bitmap image) JPG (JPEG image) PNG (PNG image) TIF (TIFF image)
Resolution (DPI):	Specify the resolution.
Brightness:	The setting you specify here will not be applied for scanning.
Contrast:	The setting you specify here will not be applied for scanning.