To adjust the image position, you need to:
Prepare a 500 mm or longer stainless steel ruler (with the scale in 0.5 mm) and magnifier (for measuring the format)
Check the supported paper size and paper type.
From the supplied CD, print the file of the format matching the size of the paper requiring image position adjustment.
Adjust the image position on Side 1. For details about adjusting the position, see Adjusting the Image Position on Side 1.
To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Specifying a Custom Paper", Preparation.
In [Advanced Settings] for the custom paper, select 1101: [Image Position] and set the value in the following settings to "0.00".
[Across Feed] of [Image Position: Side 2]
[With Feed] of [Image Position: Side 2]
[Across Feed] of [Image Magnification: Side 2]
[With Feed] of [Image Magnification: Side 2]
In [Advanced Settings] for the custom paper, select 1245: [Erase Margin] and note the values in the following settings, and then adjust the value on one side to match the larger value on the other side.
[Leading Edge]
[Trailing Edge]