Previous
To improve color reproduction and achieve color output with consistent quality, follow this procedure. It is recommended to perform color calibration for each print job. You can improve CMYK image reproduction by adjusting image density and performing calibration. Also, you can improve mixed color reproduction by adjusting image density and color registration and performing calibration. To perform calibration, calibrate using the automated inline sensor equipped in the printer or the optional ES-2000.
In the 02: [Machine: Image Quality] group on the [Adjustment Settings for Operators] menu, select 0201: [Execute Image Quality Adjustment] and execute [Adjust Image Density].
When the color density adjustment is completed, press [Exit].
Press [Exit].
Press [Home] (
) at the bottom of the screen in the center.
Press the [User Tools] icon (
).
Press [Machine Features].
Press [Maintenance].
Press [Color Registration].
Press [OK].
Auto color registration takes about 20 seconds.
Press [Exit].
Press [User Tools] (
).
Press [Home] () at the bottom of the screen in the center.
Start Fiery Command WorkStation 6.
