Previous
In the 02: [Machine: Image Quality] group on the [Adjustment Settings for Operators] menu, select 0201: [Execute Image Quality Adjustment] and execute [Adjust Image Density].
Print the image. Has the problem been resolved?
Yes | Finished! |
No | Go to the next step. |
Check the present value in 0203: [Line Width]. Is the setting set to "+5"?
Yes | Contact your service representative. |
No | In 0203: [Line Width], increase the all colors' value by 1 step. |
Print the image. Has the problem been resolved?
Yes | Finished! |
No | Repeat Step 1 to 4. If the problem persists even though you have increased the value to "+5", contact your service representative. If ghosting occurs, go to the next step. |
In 0203: [Line Width], increase the all colors' value by 1 step.
Select 0201: [Execute Image Quality Adjustment] and execute [Adjust Image Density].
Print the image. Has the problem been resolved?
Yes | Finished! |
No | Contact your service representative. |
