Previous
In [Advanced Settings] for the custom paper, check the present value in 1229: [Paper Transfer Pressure]. Is it set to [Pressure 4]?
Yes | No further improvement is likely. Contact your service representative. |
No | Increase the value in 1229: [Paper Transfer Pressure] by 1 level. |
Print the image. Has the problem been resolved?
Yes | Finished! |
No | Repeat Steps 1 and 2. If the problem persists even though you have increased the value to [Pressure 4], carry out the procedure in see Horizontal Streaks: When Using Thick Paper (1). |
Changing the value in 1229: [Paper Transfer Pressure] may produce either or both of the following side effects:
Increase in toner consumption
Occurrence of banding (streaks)
White spots
