1321 [Jam Detection] 03: [Detect JAM080]
Function
Specifies whether or not to stop printing, if registration in sub scan direction (along feed direction)
exceeds the adjustable range (+/-4mm).
When to use
Set to Off, if jam J080 occurs frequently.
If set to Off, printing will continue with the registration in feed direction corrected up to 4mm, but no more than 4mm.
Related Troubleshooting
If (J097) Appears
If (J098) Appears
Wrong Detection of Skew
Preprinted Paper
For detailed procedure, see the Troubleshooting manual.