1101 [Image Position]
1102 [Auto Adjust Image Position]
1103 [Image Position Feedback Correction]
1104 [Image Position Feedback Correction: Gap]
Function
Adjusts the position and magnification of the image to be printed on the paper.
When to use
To align the images printed on the front and back sides of the paper.
Insufficient margin at the leading edge may cause wrap around jams in the fusing unit or affect the images at the leading edge. Increasing the margin is effective in such cases.
To switch the sensor to be used between plain paper printing and special paper printing, such as printing on colored paper and transparencies.
Related Troubleshooting
Adjusting the Image Position on Side1
Adjusting the Image Position on Side2
Horizontal Streaks at the Area within 20 mm (0.8 inches) from the Leading Edge
Aligning the Image Position on Side 2 to That on Side 1 (Using a Template to Align the Image Position on Side 1 and 2)
Other Paper Delivery Problems
For detailed procedure, see the Troubleshooting manual.