1229 [Paper Transfer Pressure]

Adjust the transfer pressure at the paper transfer section. Select a higher value (1 -> 4) for the pressurization for paper that is more uneven.

Note

  • If the paper transfer pressure is specified differently for different paper types, the throughput is reduced because of the need to switch the transfer roller pressure when handling a job with sheets of mixed paper type.

  • Note that if you set to [5:Pressure 5], the pressure becomes lower than [1:Pressure 1].

Setting Item

Values

01: Pressure Mode

[1:Pressure 1]

[2:Pressure 2]

[3:Pressure 3]

[4:Pressure 4]

[5:Pressure 5]

PreviousNext