Adjust the position (top and bottom) of punch holes in the across direction. Use [+] or [-] to move punch hole up or down.
This function can be used with Finisher SR5110 or Booklet Finisher SR5120.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
---|---|---|---|---|---|
[2 Holes JP/ EU] | 0.0 | 2.0 | -2.0 | 0.5 | mm |
[3 Holes US] | |||||
[4 Holes EU] | |||||
[4 Holes NE] | |||||
[2 Holes US] |