Reset the counter value of replacement part after the replacement. Refer to "Replacement Manual" for the procedure of part replacement.
Setting Items | Remarks |
---|---|
[PCU Cleaning Unit (K)] | Press [Execute]. |
[Charger Unit (K)] | |
[Photoconductor Unit (K)] | |
[PCU Cleaning Unit (C)] | |
[Charger Unit (C)] | |
[Photoconductor Unit (C)] | |
[PCU Cleaning Unit (M)] | |
[Charger Unit (M)] | |
[Photoconductor Unit (M)] | |
[PCU Cleaning Unit (Y)] | |
[Charger Unit (Y)] | |
[Photoconductor Unit (Y)] | |
[ITB Cleaning Unit] | |
[ITB Lubrication Unit] | |
[Linear Scale Cleaner] | |
[Paper Transfer Unit] | |
[Fuser Unit] | |
[Fusing Belt Smoothing Rlr] | |
[Fuser Cleaning Unit] | |
[Dust Filter (K)] | Press [Execute]. |
[Dust Filter (C)] | |
[Dust Filter (M)] | |
[Dust Filter (Y)] | |
[Ozone Filter] | |
[Tray 1: Feed Belt] | |
[Tray 2: Feed Belt] | |
[Bypass Tray] | |
[Interposer Upper Tray] | |
[Interposer Lower Tray] | |
[2-Tray LCIT:Tray3:Fd Blt] | |
[2-Tray LCIT:Tray4:Fd Blt] | |
[2-Tray LCIT:Tray5:Fd Blt] | |
[2-Tray LCIT:Tray6:Fd Blt] | |
[2-Tray LCIT:Tray7:Fd Blt] | |
[2-Tray LCIT:Tray8:Fd Blt] |