Previous
The adjustment settings are applied to printed copies according to the settings specified for each paper tray and paper weight.
Depending on the adjustment setting, the same settings specified under different categories may be applied to printed copies concurrently.
Settings for each paper tray
Settings for each paper size
Settings for each paper tray
These adjustment settings can be specified for each paper tray.
The settings are applied only to printed copies fed from each paper tray.
Settings for each paper size
These adjustment settings can be specified for each paper size.
The settings are applied only to printed copies of each paper size.
For information about the paper tray and tray paper size settings that can be specified for a particular function, see the manual for the relevant function.
In "Advanced Settings" for custom paper, there are settings identical to those in Adjustment Settings for Operators. When printing is performed from a tray to which the custom paper setting is allocated, the setting in "Advanced Settings" for the custom paper is applied instead of the setting in Adjustment Settings for Operators.
However, the operations related to the adjustment settings described in items below, will be as follows:
Image Density
[Machine: Image Quality]
0202 [Maximum Image Density][Machine: Image Quality]
1201 [Max Image Density]The specified settings in Adjustment Settings for Operators are not disabled. Instead, when printing from a tray containing custom paper, the values specified in "Advanced Settings" and Adjustment Settings for Operators are both applied in addition to the print setting.
Fusing Belt Smoothing
[Machine: Maintenance]
0512 [Fusing Belt Smoothing Setting][Machine: Image Quality]
1249 [Fusing Belt Smoothing]Adjustment Settings for Operators and Custom Paper Settings are applied in combination as follows:
Values
Operation (with e Adjustment Settings for ach sheet counted as A4)
Adjustment Settings for Operators
Custom Paper Settings
[Off]
[0:Off (Do not Execute)]
The fusing belt is not cleaned.
[1:Normal]
[2:Frequently]
[3:More Frequently]
[4:Most Frequently]
[Automatic Execution]*
[0:Off (Do not Execute)]
The fusing belt is not cleaned.
[Most Frequently]*
[Automatic Execution:Set by User]*
[Automatic Execution]*
[1:Normal]
The fusing belt is cleaned for 60 seconds every 2000 sheets.
[2:Frequently]
The fusing belt is cleaned for 60 seconds every 667 sheets.
[3:More Frequently]
The fusing belt is cleaned for 60 seconds every 400 sheets.
[4:Most Frequently]
The fusing belt is cleaned for 60 seconds every 200 sheets.
[Most Frequently]*
[1:Normal]
The fusing belt is cleaned for 10 seconds every 150 sheets and for 360 seconds every 2000 sheets.
[2:Frequently]
The fusing belt is cleaned for 10 seconds every 50 sheets and for 360 seconds every 667 sheets.
[3:More Frequently]
The fusing belt is cleaned for 10 seconds every 30 sheets and for 360 seconds every 400 sheets.
[4:Most Frequently]
The fusing belt is cleaned for 10 seconds every 15 sheets and for 360 seconds every 200 sheets.
[Automatic Execution:Set by User]*
[1:Normal]
The fusing belt is cleaned for 30 seconds every 500 sheets and for 150 seconds every 2000 sheets.
[2:Frequently]
The fusing belt is cleaned for 30 seconds every 167 sheets and for 150 seconds every 667 sheets.
[3:More Frequently]
The fusing belt is cleaned for 30 seconds every 100 sheets and for 150 seconds every 400 sheets.
[4:Most Frequently]
The fusing belt is cleaned for 30 seconds every 50 sheets and for 150 seconds every 200 sheets.
* As well as these specified timings for cleaning the fusing belt, the machine automatically cleans the fusing belt inaccordance with the default timing. The fusing belt is cleaned during the machine's process control operation (every 5000 sheets). The time taken for this cleaning is the same as the long fusing belt cleaning time specified in Custom Paper
Settings.
