Configuration:
Console
Hard disk:
320 GB
Photosensitivity type:
OPC drum
Print process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Oilless belt fusing
Resolution:
2,400 × 4,800 dpi
Warm-up time (23°C (73.4°F), rated voltage)
540 seconds
Paper size:
Trays 1–2:
For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS, 11 × 17, 81/2 × 14,
81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10,
71/4 × 101/2, 51/2 × 81/2, 8K, 16K, 12 × 18, 11 × 15, 11 × 14,
10 × 15, 10 × 14, 13 × 191/5, 13 × 19, 123/5 × 191/5, 123/5 × 181/2,
13 × 18, SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, 81/2 × 132/5,
41/5 × 51/2
Duplex (custom size):
Vertical: 100.0–330.2 mm (3.94–13.00 inches)
Horizontal: 139.7–487.7 mm (5.50–19.20 inches)
Paper weight:
Trays 1–2: For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex: 52.3–470.0 g/m2 (14.0 lb. Bond–259.9 lb. Index)
The paper brand of usable paper of 400g/m2 or more is specified. For details, contact your local dealer.
Print speed (Full Color / B&W):
Type 1: 115 sheets/minute (A4, 81/2 × 11)
Type 2: 135 sheets/minute (A4, 81/2 × 11)
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see "Recommended Paper Sizes and Types", Preparation.
Power requirements:
(mainly Europe and Asia)
220–240 V, 60 A (30 A × 2), 50/60 Hz
(mainly North America)
208–240 V, 60 A (30 A × 2), 50/60 Hz
Power consumption:
(mainly Europe and Asia)
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Ready |
830 W |
830 W |
During printing |
3,984 W |
5,371 W |
Maximum |
6,988 W |
6,988 W |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
(mainly North America)
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Ready |
830 W |
830 W |
During printing |
4,022 W |
5,651 W |
Maximum |
7,817 W |
7,817 W |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Regarding switching to Off mode based on the Weekly Timer's event setting Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day.
By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less.
In order to change the settings, refer to the manuals for your product.
When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].
Dimensions (W × D × H up to the top of the toner cartridge compartment (excluding the control panel and the attention light)):
2,520 × 990 × 1,500 mm (99.3 × 39.0 × 59.1 inches)
Space for main unit (W × D):
2,520 × 990 mm (99.3 × 39.0 inches)
Noise emission:
Sound power level:
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
61.0 dB (A) |
61.0 dB (A) |
Printing |
79.4 dB (A) |
79.0 dB (A) |
Sound pressure level:
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
53.5 dB (A) |
53.5 dB (A) |
Printing |
65.8 dB (A) |
65.5 dB (A) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit and Booklet Finisher SR5060.
Weight:
Approx. 1,075 kg (2,369 lb.)
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see the file in the OSS folder on the CD-ROM supplied with the machine.