Previous
You can adjust the color, brightness and display position of the control panel screen using the display adjustment keys in the bottom right part of the control panel.
To adjust the display and unlock it, press and hold the Up and Down buttons at the same time for five seconds.
Mode button
Press this button to start or end display adjustment. This button also selects or deselects the setting item when you are adjusting the display.
Up button
Press this button to move between the setting items, or change the setting value.
The cursor moves to the item above when moving between the items.
The value increases when changing a setting value.
It is also used to enable the display adjustment function.
Down button
Press this button to move between the setting items, or change the setting value.
The cursor moves to the item below when moving between the items.
The value decreases when changing a setting value.
It is also used to enable the display adjustment function.
Display adjustment screen
Setting item |
Content |
Setting range |
Initial value |
|---|---|---|---|
Contrast |
Adjust the overall contrast of all colors in RGB |
0-255 |
55 |
ContrastRed |
Adjust the contrast in red (digital setting) |
0-255 |
50 |
ContrastGreen |
Adjust the contrast in green (digital setting) |
0-255 |
50 |
ContrastBlue |
Adjust the contrast in blue (digital setting) |
0-255 |
50 |
Filter |
Select the spatial filter setting |
Non, 0-4 |
Non |
Gamma |
Specify the gamma value setting |
0.1-3.0 |
1.0 |
Backlight |
Adjust the brightness |
0-31 |
24 |
InputSelect |
Select an image source to display |
DVI/RGB |
DVI |
OSD HPosition |
Adjust the horizontal position to display the display adjustment screen (OSD) |
5-253 |
128 |
OSD VPosition |
Adjust the vertical position to display the display adjustment screen (OSD) |
63-210 |
128 |
OSD Effect |
Specify the opacity setting of the display adjustment screen (OSD) |
0-7 |
0 |
OSD Timeout |
Specify the time to wait before closing the display adjustment screen (OSD) |
Non, 5-60*1 |
30 |
Default |
Select to initialize the settings |
- |
- |
Save Data |
Select to save the data |
- |
- |
Cancel |
Select to cancel selection, or hide the display adjustment screen (OSD) |
- |
- |
Status |
Select to display the status screen |
- |
- |
*1 Select the time from 5-10, 15, 20, 30, 40, 50 and 60.
