Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment.
When the degree of coloration differs depending on the difference in the degree of pigmentation, adjust the toner adhesion amount.
Press [] or [
] to increase or decrease the toner adhesion amount.
If you change the setting value, [Adjust Image Density] is automatically performed before the machine starts printing.
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
Black Cyan Magenta Yellow |
0 |
5 |
-5 |
1 |
- |
Increasing the toner adhesion might reduce fusibility, causing toner splatter or distorted text and thin lines.