Adjust the image position (left and right) on side 1 along the feeding direction.
Press [] to shift the image position to the right (toward the bottom edge), or press [
] to shift the position to the left (toward the leading edge).
Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
---|---|---|---|---|---|
Tray 1 Tray 2 2-Tray LCIT: Tray 3 2-Tray LCIT: Tray 4 2-Tray LCIT: Tray 5 2-Tray LCIT: Tray 6 2-Tray LCIT: Tray 7 2-Tray LCIT: Tray 8 Bypass Tray Extended Option Tray |
0.00 |
3.00 |
-3.00 |
0.01 |
mm |
If sheets are delivered face down, turn them over horizontally and check the image position.
If the leading-edge margin on the side 1 of the paper is too narrow, paper jams may occur.
If the trailing-edge margin on the side 1 of the paper is too narrow, paper jams may occur when printing on the back in duplex printing.
This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Image Position: Side1] in [Advanced Settings] takes precedence.