Menu Items and Functions

0101

Image Position: With Feed: Side 1

Adjust the image position (left and right) on side 1 along the feeding direction.

0102

Image Position: With Feed: Side 2

Adjust the image position (left and right) on side 2 along the feeding direction.

0103

Image Position: Across Feed: Side 1

Adjust the image position (up and down) on side 1 across the feeding direction.

0104

Image Position: Across Feed: Side 2

Adjust the image position (up and down) on side 2 across the feeding direction.

0105

Image Magnification: With Feed: Side 1

Adjust the horizontal image scaling to print on Side 1 of the paper according to the paper expansion or shrinkage.

0106

Image Magnification: With Feed: Side 2

Adjust the horizontal image scaling to print on Side 2 of the paper according to the paper expansion or shrinkage.

0107

Image Magnification: Across Feed: Side 1

Adjust the vertical image scaling to print on Side 1 of the paper according to the paper expansion or shrinkage.

0108

Image Magnification: Across Feed: Side 2

Adjust the vertical image scaling to print on Side 2 of the paper according to the paper expansion or shrinkage.

0109

Perpendicularity Adjustment

Adjust the image skew (perpendicularity) across the feeding direction.

0110

Switch Paper Edge Detection Sensor

Specify the level for detecting the paper edge for correcting the image position along the feeding direction.

0201

Execute Image Quality Adjustment

Execute image control or color registration adjustment manually.

0202

Maximum Image Density

Adjust the toner adhesion amount to the intermediate transfer belt during the image density adjustment.

0203

Line Width

Adjust the intensity of the laser for rasterizing the image data.

0301

Correct Output Paper Curl: 1 Sided: Face Up

Specify the method for straightening paper curls on 1-sided face-up output sheets.

0302

Correct Output Paper Curl: 1 Sided: Face Down

Specify the method for straightening paper curls on 1-sided face-down output sheets.

0303

Correct Output Paper Curl: 2 Sided

Specify the method for straightening paper curls on 2-sided output sheets.

0304

Detect JAM099

Specify whether or not to detect double feed (multi-sheet feeding). This setting is invalid when you are printing from the tray for which custom paper is allocated.

0305

Detect JAM080

Specify whether or not to detect error as a paper jam when the image deviation in the feeding direction exceeds a certain degree.

0306

Detect J097/098

Specify whether or not to detect error as a paper jam when a deviation or paper skew across the feeding direction is detected.

0307

Control J097/098

Specify whether or not to correct an image position and skew across the feeding direction.

0308

Detect JAM048

Specify whether or not to detect an error as a paper jam when a problem is detected while the registration mark is checked for image position correction.

0505

Temperature / Humidity Inside

Display the internal temperature and humidity.

0506

Temperature / Humidity Outside

Display the external temperature and humidity.

0507

Screw-on Cap to Replace

Close the Toner Bottle Cap.

Open the toner bottle cover (the cover of the toner dispensing section) before executing this function.

Afterward, remove the toner bottle by pushing the knob below the bottle.

0508

Execute Developer Refreshing

The machine uses degraded toner in the development unit and adds new toner from the toner bottle.

0509

Execute Photoconductor Refreshing

Remove dust on the drum surface.

0510

Execute Charger Unit Cleaning

Cleans the Charge Unit.

0512

Fusing Belt Smoothing Setting

Specify the condition to execute Fuser Belt smoothing.

0513

Smooth Fusing Belt

Smooth the Fuser Belt to remove vertical and horizontal lines from the printouts.

0516

Manage Multiple Fusing Units by Counter

Display the counter of Fusing Unit parts.

0601

Staple Position: Across Feed 1

Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5050 or Booklet Finisher SR5060.

0602

Staple Position: Across Feed 2

Adjust the vertical position of the staples (dual) when using Finisher SR5050 or Booklet Finisher SR5060.

0603

Staple Position: With Feed

Adjust the horizontal position of the staples when using Finisher SR5050 or Booklet Finisher SR5060.

0604

Paper Alignment for Stapling: Across Feed

Adjust the width of the Staple Jogger^*1 when using the staple function on Finisher SR5050 or Booklet Finisher SR5060.

0605

Paper Alignment for Stapling: With Feed

Adjust the Tip Stopper movement when using the staple function applied at an angle on Finisher SR5050 or Booklet Finisher SR5060.

0606

Number of Sheets Align for Stapling

Specify the number of sheets to align for stapling at one time.

0607

Punch Position: Across Feed

Adjust the vertical position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0608

Punch Position: With Feed

Adjust the horizontal position of the punch holes when using Finisher SR5050 or Booklet Finisher SR5060.

0609

Punch Skew Correction

Specify whether or not to correct the punch skew when using Finisher SR5050 or Booklet Finisher SR5060.

0610

Amount of Punch Skew Correction

Adjust the level of skew correction when using Finisher SR5050 or Booklet Finisher SR5060.

0611

Paper Alignment in Shift Tray Setting

Specify the alignment precision of output sheets during Shift Sorting when using Finisher SR5050 or Booklet Finisher SR5060.

0612

Paper Alignment in Shift Tray: Across Feed

Adjust the width of Paper Alignment Jogger^*1 on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0613

Output Tray Descending Position

Specify the tray descent range according to the paper weight when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0614

Exit Guide Close Timing

Specify the timing to close the Paper Exit Guide when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0615

Output Trail Edge Press Setting

Specify whether or not to hold the trailing edge of sheets when they are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0616

Output Fan Setting

Specify the fan operation to the sheets on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0617

Output Fan Level

Specify the air flow of the fan on the Shift Tray when sheets are ejected and delivered to the Shift Tray of Finisher SR5050 or Booklet Finisher SR5060.

0618

Staple Position for Booklet

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5060.

0619

Folding Position for Booklet

Adjust the horizontal position of the folding when using Booklet Finisher SR5060.

0620

Paper Alignment for Booklet: Across Feed

Adjust the width of the Staple Jogger^*1 when using Booklet Finisher SR5060.

0621

Set Number of Folds for Booklet

Specify the number of booklet folds to be performed when using Booklet Finisher SR5060.

0622

Paper Alignment for Booklet: With Feed

Adjust the Tip Stopper movement when using the booklet binding function on Booklet Finisher SR5060.

0623

Z-fold Skew Correction

Select the method to correct the skew during Z-folding on the fold unit.

0624

Amount of Z-fold Skew Correction

Adjust the striking amount of paper during Z-folding skew correction.

0625

Amount of Z-fold Skew Correction: Reverse

Adjust the reverse rotation amount of Registration Roller during Z-folding skew correction.

0626

Maximum No. Stacked Sheets in Output Tray

Specify the number of sheets to stack on the Shift Tray at the time of shift sorting.

0630

Staple Position for Booklet

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120.

0631

Folding Position for Booklet

Adjust the horizontal position of the folding when using Booklet Finisher SR5120.

0632

Staple Position: Across Feed 1

Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher SR5120.

0633

Staple Position: Across Feed 2

Adjust the vertical distance (up and down) between the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120.

0634

Staple Position: With Feed

Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120.

0635

Punch Position: Across Feed

Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0636

Punch Position: With Feed

Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0638

Set Number of Folds for Booklet

Specify the number of booklet folds to be performed when using Booklet Finisher SR5120.

0666

Staple Tray: Rib Installed Mode to Strengthen Paper

Set the operation when the Paper Strengthening Rib is installed to Staple Tray when using Finisher SR5110 or Booklet Finisher SR5120.

0667

Accuracy Priority for Stapling

Set the accuracy priority for stapling when using Finisher SR5110 or Booklet Finisher SR5120.

0668

Accuracy Priority for Booklet

Set the accuracy priority for a booklet when using Booklet Finisher SR5120.

0701

Z-fold Position 1

Adjust the fold position of the end segment when using the fold unit.

0702

Z-fold Position 2

Adjust the overall fold size of the Z-foldout sheets when using the fold unit.

0703

Half Fold Position: 1 sheet Fold

Adjust the fold position of the half folded sheets (1 sheet fold) when using the fold unit.

0704

Half Fold Position: Multi-sheet Fold

Adjust the fold position of the half folded sheets (multisheet fold) when using the fold unit.

0705

Letter Fold-out Position 1: 1 sheet Fold

Adjust the fold position of the bottom segment of letter foldout sheets (1 sheet fold) when using the fold unit.

0706

Letter Fold-out Position 1: Multi-sheet Fold

Adjust the fold position of the bottom segment of letter foldout sheets (multisheet fold) when using the fold unit.

0707

Letter Fold-out Position 2: 1 sheet Fold

Adjust the overall fold size of letter foldout sheets (1 sheet fold) when using the fold unit.

0708

Letter Fold-out Position 2: Multi-sheet Fold

Adjust the overall fold size of letter foldout sheets (multisheet fold) when using the fold unit.

0709

Letter Fold-in Position 1: 1 sheet Fold

Adjust the fold position of the bottom segment of letter fold-in sheets (1 sheet fold) when using the fold unit.

0710

Letter Fold-in Position 1: Multi-sheet Fold

Adjust the fold position of the bottom segment of letter fold-in sheets (multisheet fold) when using the fold unit.

0711

Letter Fold-in Position 2: 1 sheet Fold

Adjust the inner fold size of letter fold-in sheets (1 sheet fold) when using the fold unit.

0712

Letter Fold-in Position 2: Multi-sheet Fold

Adjust the inner fold size of letter fold-in sheets (multisheet fold) when using the fold unit.

0713

Double Parallel Fold Position 1

Adjust the fold position of the bottom segment 1 of double parallel-folded sheets when using the fold unit.

0714

Double Parallel Fold Position 2

Adjust the fold position of the bottom segment 2 of double parallel-folded sheets when using the fold unit.

0715

Gate Fold Position 1

Adjust the fold position of the bottom segment 1 of gatefold sheets when using the fold unit.

0716

Gate Fold Position 2

Adjust the fold position of the bottom segment 2 of gatefold sheets when using the fold unit.

0717

Gate Fold Position 3

Adjust the fold position of the bottom segment 3 of gatefold sheets when using the fold unit.

0801

Perf Bind Cvr Sht Posit: Across Feed

Adjust the vertical alignment of the cover sheet position when performing perfect binding.

0802

Perf Bind Cvr Sht Posit: With Feed

Adjust the horizontal alignment of the cover sheet position when performing perfect binding.

0803

Perfect Binding Finishing Angle

Square the top, bottom, and outside edges when trimming a deck of paper.

0804

Applying Binding Glue

Adjust the amount of binding glue for perfect binding.

0901

Ppr Align in Stack Tray: Acr Feed 1

Adjust the alignment width in Main Jogger^*1 when output sheets are stacked on the stacker.

0902

Ppr Align in Stack Tray: Acr Feed 2

Adjust the alignment width in Sub Jogger^*1 when output sheets are stacked on the stacker.

0903

Paper Alignment in Stacker Tray: With Feed

Adjust the alignment position of the Tip Stopper when output sheets are ejected on the Stacker.

0904

Ppr Align in 2nd Stack Tray: Acr Feed 1

Adjust the alignment width in Main Jogger^*1 when output sheets are stacked on the 2nd stacker.

0905

Ppr Align in 2nd Stack Tray: Acr Feed 2

Adjust the alignment width in Sub Jogger^*1 when output sheets are stacked on the 2nd stacker.

0906

Ppr Align in 2nd Stack Tray: With Feed

Adjust the alignment position of the Tip Stopper when output sheets are ejected on the 2nd stacker.

0907

Maximum Stack Quantity in Stacker Tray

Specify the maximum number of sheets that can be stacked on the stacker tray. The setting applies to both the 1st and 2nd stackers.

1001

Density Difference Printing: Across Feed

To reduce image density diff.

2101

Detect JAM573

Set ON / OFF for JAM573 (detection of multi feed).

2101

Detect JAM574

Set ON / OFF for JAM574 (detection of multi feed).

2102

Interposer Fan Setting

Set the fan operation for Interposer.

2103

Interposer Fan Level

Adjust the correction value for the standard value of the interposer fan level.