Skip header
 

Programming the Realm

1Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.

2Press the [User Tools] (Operation panel screen illustration) icon on the [Home] screen.

3Press [Machine Features].

4Press [System Settings].

5Press [Administrator Tools].

6Press [Down arrow keyNext] until [Program / Change / Delete Realm] is displayed.

7Press [Program / Change / Delete Realm].

8Check that [Program / Change] is selected.

9Press [*Not Programmed].

10Press [Change] under "Realm Name".

11Enter a realm name, and then press [OK].

Enter the realm name or host name.

You can enter a realm name up to 64 characters.

12Press [Change] under "KDC Server Name".

13Enter a KDC server name, and then press [OK].

Enter the KDC server name, host name or IPv4 address.

You can enter a KDC server name up to 64 characters.

14Press [Change] under "Domain Name".

15Enter the domain name, and then press [OK].

Enter the domain name or host name.

You can enter a domain name up to 64 characters.

16Press [OK].

17Press [Exit].

18Press [User Tools] (Operation panel screen illustration) on the top right of the screen.

19Press [Home] (Operation panel screen illustration) at the bottom of the screen in the center.