Previous
In [Advanced Settings] for the custom paper you are using, check the present value in 1242: [Initial Fusing Temperature for Envelope]. Is it [On]?
Yes |
Go to the next step. |
No |
You cannot improve throughput under the present condition. |
Set 1242: [Initial Fusing Temperature for Envelope] to [Off].
To adjust the following settings, pre-register the type of paper in use as a custom paper. For details about registering custom papers, see "Specifying a Custom Paper", Preparation.
Setting this to [Off] may cause the following problems:
Wrinkles, Worm Track
Insufficient toner fusibility
Check the toner fusibility as follows:
The image does not come off.
Toner does not come off even if it is lightly scratched with a fingernail.
Toner does not come off even if the image is wiped with the dry cloth for cleaning the contact glass.
