< Paper with a width of 191–261 mm (7.6 - 10.4 inches) is being used >
Load the sheets the other way up.
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
To follow the steps below, attach the decurler unit.
In the [Machine: Paper Feed/ Output] group of the [Adjustment Settings for Operators] menu, set 0304: [Correct Output Paper Curl] to "U Curl Correction Level: Off".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0304: [Correct Output Paper Curl] to "U Curl Correction Level: Small".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0304: [Correct Output Paper Curl] to "U Curl Correction Level: Large".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0304: [Correct Output Paper Curl] to "П Curl Correction Level: Small".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0304: [Correct Output Paper Curl] to "П Curl Correction Level: Large".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Contact your service representative. |