Previous
Curl the sheet upward.
To do this, the decurler unit must be attached.
In the [Machine: Paper Feed/ Output] group on the [Adjustment Settings for Operators] menu, set 0304: [Correct Output Paper Curl] to "П Curl Correction Level: Small".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Go to the next step. |
Set 0304: [Correct Output Paper Curl] to "П Curl Correction Level: Large".
Print the image. Has the problem been resolved?
Yes |
Finished! |
No |
Contact your service representative. |
The top sheet of each offset bundle of delivered sheets may protrude above the rest of the bundle by about 7 mm.
