Skip header
 

Solution:

Fix the paper by either of the following ways: "(a) Set the reverse side of the paper" or "(b) Adjust by the decurler".

(a) Set the reverse side of the paper

  1. Load the sheets the other way up.

  2. Print the image. Is the problem resolved?

    Yes

    Finished!

    No

    Contact your service representative.

(b) Adjust by the decurler

  1. In the [Main Unit: Paper Feed/ Output] group of [Adjustment Settings for Operators], select 0310: [Correct Output Paper Curl] to correct П curl.

    Set the correction level to either "Correction Level: Small" or "Correction Level: Large" according to the paper type.

  2. Print the image. Is the problem resolved?

    Yes

    Finished!

    No

    Contact your service representative.