Previous
The solution depends on the interval at which the colored spots appear.
(a) Colored spots appear at 189 mm (7.5 inches) intervals
(b) Colored spots appear at 40 mm (1.6 inches) intervals
*1: Print a full-page, half-tone sheet of A3, DLT or longer paper for each of cyan, magenta, and yellow, and black.
Do not use ethanol or any other organic solvent to clean the photoconductor unit. Otherwise it may cause damage to the photoconductor unit.
For details about replacing the photoconductor unit, see Replacement Guide.
Do not use ethanol or any other organic solvent to clean the charge roller. Otherwise it may cause damage to the charge roller.
For details about replacing the charge unit, see Replacement Guide.
After performing the solution, it is recommended to perform the color calibration of the external controller.
Depending on the country of use, the paper tray heater may not be supplied.
