Previous
In the [Machine: Maintenance] group on the [Adjustment Settings for Operators] menu, select 0508: [Manually Smooth Fusing Belt], and then execute [Belt Scratches].
Print the image. Has the problem been resolved?
Yes |
Go to the next step. |
No |
Repeat Steps 1 and 2. If the problem persists even after executing [Belt Scratches] 5 times, contact your service representative. |
In [Advanced Settings] for the custom paper you are using, select 1243: [Fusing Belt Smoothing], and then check the present value in [For Belt Scratches]. Is it [Off (Do not Execute)]?
Yes |
Finished! |
No |
Increase the value in [For Belt Scratches] by 1 level. |
