Resetting the Replaceable Parts Counter

Open the front covers.

Turn the machine on.

See Turning Off/On the Power.

Access the Adjustment Settings for Operators menu.

See "Accessing Adjustment Settings for Operators", Adjustment Item Menu Guide: TCRU/ORU.

Press [Machine:Maintenance].

Press [Reset Parts Counter].

Press the button of the part that has been replaced.

Press [OK], and then close the front covers.

The counter for the replaced component is reset. The setting for adjusting the machine for the replaced component is executed automatically.

Access the Adjustment Settings for Operators menu.

See "Accessing Adjustment Settings for Operators", Adjustment Item Menu Guide: TCRU/ORU.

Press [Machine:Maintenance].

Press [Display Parts Life Counter].

Make sure the counter has been reset.