Top Page > Adjustment Item Menu Guide: TCRU/ORU > Details of Menu Items in Adjustment Settings for Operators > [Finishing: Finisher] > 0624 [Amount of Z-fold Skew Correction]
Adjust striking amount of paper during Z-folding skew correction. It is used when side effects occur. The initial setting of paper striking is 9mm and becomes 0mm by setting [-9].

Setting Item |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
[Setting] |
0.0 |
0.0 |
-9.0 |
0.5 |
mm |