Top Page > Adjustment Item Menu Guide: TCRU/ORU > Details of Menu Items in Adjustment Settings for Operators > [Finishing: Finisher] > 0607 [Punch Position: Across Feed]
Adjust the position (top and bottom) of punch holes in the across direction. Use [+] or [-] to move punch hole up (far side) or down (front side).

Setting Items |
Default Value |
Max. Value |
Min. Value |
Step |
Unit |
[2 Holes JP/ EU] |
0.0 |
2.0 |
-2.0 |
0.5 |
mm |
[3 Holes US] |
[4 Holes EU] |
[4 Holes NE] |
[2 Holes US] |