Specifications for the Main Unit
PreviousNext
Configuration:
Console
Hard disk:
320 GB × 2
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CMOS
Copy process:
Dry electrostatic transfer system
Development:
Dry two-component magnetic brush development system
Fusing:
Oilless belt fusing
Resolution:
Scanning originals: 600 dpi
Copying: 2,400 × 4,800 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C (73.4°F), rated voltage)
296 seconds
Originals:
Sheet, book, three-dimensional object
Maximum original size (ADF, exposure glass):
(mainly Europe and Asia)A3
(mainly North America)11 × 17
Paper size:
Trays 1–2:
For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex:
A3
, A4
, A5, B4 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11
, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/2
, 8K, 16K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 13 × 18
, SRA3, SRA4, 81/2 × 132/5Duplex (custom size):
Vertical: 139.7–330.2 mm (5.50–13.00 inches)
Horizontal: 200.0–487.7 mm (7.87–19.20 inches)
Paper weight:
Trays 1–2: For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex: 52.3–300.0 g/m2 (14.0 lb. Bond–165.0 lb. Index)
Missing image area (Copier):
For details, see "Missing image area", Preparation.
First copy/print time (Full Color/B&W):
11 seconds
(A4, 81/2 × 11, 100% reproduction, feeding from Tray 1, on the exposure glass)
Copy/print speed (Full Color / B&W):
Type 1 and 2:
85 sheets/minute (A4
, 81/2 × 11)Type 3 and 4:
95 sheets/minute (A4
, 81/2 × 11)
Reproduction ratio:
- (mainly Europe and Asia)
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
- (mainly North America)
Preset reproduction ratios (%):
Enlargement: 400, 200, 155, 129, 121
Full size: 100
Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom: From 25–400% in increments of 1%
Maximum continuous copy run:
9,999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
For details, see "Recommended Paper Sizes and Types", Preparation.
Power requirements:
- (mainly Europe and Asia)
220–240 V, 25 A (16 A × 2), 50/60 Hz
- (mainly North America)
208–240 V, 24 A (16 A × 2), 50/60 Hz
Power consumption:
- (mainly Europe and Asia)
Main unit only
Type 1
Type 2
Type 3
Type 4
Ready
316.8 W
316.8 W
322.5 W
322.5 W
During printing
1837.9 W
1837.9 W
1961.5 W
1961.5 W
Maximum
4314.3 W or less
4314.3 W or less
4316.3 W or less
4316.3 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1
Type 2
Type 3
Type 4
Maximum
4362.3 W
4362.3 W
4364.3 W
4364.3 W
The complete system consists of the main unit, multi bypass tray (tray A), three-tray wide large capacity tray, interposer, Finisher SR5050, and Fiery controller.
- (mainly North America)
Main unit only
Type 1
Type 2
Type 3
Type 4
Ready
316.9 W
316.9 W
313.4 W
313.4 W
During printing
1845.3 W
1845.3 W
1877.0 W
1877.0 W
Maximum
4614.7 W or less
4614.7 W or less
4623.0 W or less
4623.0 W or less
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Regarding switching to Off mode based on the Weekly Timer's event setting
Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day.
By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less.
In order to change the settings, refer to the manuals for your product.
When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].
Complete system
Type 1
Type 2
Type 3
Type 4
Maximum
4662.7 W
4662.7 W
4671.0 W
4671.0 W
The complete system consists of the main unit, multi bypass tray (tray A), three-tray wide large capacity tray, interposer, Finisher SR5050, and Fiery controller.
Dimensions (W × D × H up to ADF (excluding the control panel and the attention light)):
1,320 × 910 ×1,230 mm (52.0 × 35.9 ×48.0 inches)
Space for main unit (W × D):
1,320 × 910 mm (52.0 × 35.9 inches)
Noise emission:
Sound power level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Stand-by
58.5 dB (A)
58.5 dB (A)
58.5 dB (A)
58.5 dB (A)
Copying
78.5 dB (A)
78.5 dB (A)
78.5 dB (A)
78.5 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Stand-by
61.0 dB(A)
61.0 dB(A)
61.0 dB(A)
61.0 dB(A)
Copying
81.5 dB(A)
81.5 dB(A)
81.5 dB(A)
81.5 dB(A)
Sound pressure level:
Main unit only
Type 1
Type 2
Type 3
Type 4
Stand-by
52.5 dB (A)
52.5 dB (A)
52.5 dB (A)
52.5 dB (A)
Copying
68.5 dB (A)
68.5 dB (A)
72.5 dB (A)
72.5 dB (A)
Complete system
Type 1
Type 2
Type 3
Type 4
Stand-by
55.0 dB(A)
55.0 dB(A)
55.0 dB(A)
55.0 dB(A)
Copying
72.5 dB(A)
72.5 dB(A)
72.5 dB(A)
72.5 dB(A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, two-tray wide large capacity tray, decurl unit, buffer pass unit, interposer, multi-folding unit, ring binder, high capacity stacker, Finisher SR5050, and trimmer.
Weight:
Type 1 and 3
Approx. 580 kg (1278.7 lb.)
Type 2 and 4
Approx. 600 kg (1322.8 lb.)
We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see the file in the OSS folder on the CD-ROM supplied with the machine.
