Previous
When loading the following paper, attach the small tab end fence:
B5 JIS
(width: 182 mm; length: 257 mm)–SRA4 (width: 225 mm; length: 320 mm) of Paper Weight 8Carbonless paper of Paper Weight 2 or less
Check that paper in the paper tray is not being used, and then pull the tray carefully out until it stops.
Take out the small tab end fence from the pocket on the right-hand side of the paper source tray.
Set the side fences to the size of the paper to be loaded, and then load paper into the tray.
Attach the small tab end fence, and then align the end fence gently against the paper you loaded while pressing the release button of the end fence.
Carefully push the paper tray fully in until it clicks.
Replace the small tab end fence after use.
