Interpreting the configuration page

This section describes the configuration page.

System Reference

Machine ID
Displays the serial number assigned to the board by its manufacturer.
Total Memory
Displays the total amount of memory (SDRAM) installed on the machine.
Total Counter
Displays the total number of pages printed by the machine to date.
Firmware Version
- Printer
  Displays the version number of the machine firmware.
- System
  Displays the version number of the system firmware.
- Engine
  Displays the version number of the machine engine.
- LCDC
  Displays the version number of the panel display.
- NIB
  Displays the version number of the network interface.
Device Connection
Displays the installed device options.
HDD: Font/Macro Download
Displays the capacity of the hard disk drive.
Printer Language
Displays the version number of the printer language.
Attached Equipment
Displays the installed optional equipments.
Consumption Status
Displays the supply status.

Paper Input

Displays settings made under the [Tray Paper Settings] screen.

Data Management

Displays settings made under the [Data Management] tab.

System

Displays settings made under the [System] tab.

PCL Menu

Displays settings made under the [PCL Menu] tab.

PS Menu

Displays settings made under the [PS Menu] tab.

PDF Menu

Displays settings made under the [PDF Menu] tab.

Host Interface

Displays settings made under the [Host Interface] tab.

When DHCP is active on the network, the actual IPv4 address, subnet mask and gateway address appear in parentheses on the configuration page.

Interface Information

Displays the interface information.

Virtual Printer

Displays whether the virtual printer is active or inactive.