Previous
This section describes the user tools in the Page Numbering menu under [Stamp].
Stamp Format
You can select the page number format given priority when [Page Numbering] is pressed.
Default: [P1,P2...]
Font
You can select the font in Page Numbering mode.
Default: [Font 1]
Size
You can select the size of the stamp printed in Page Numbering mode.
Default: [Auto]
Duplex Back Page Stamping Position: T to T
You can select the position of the duplex back page number printed in Duplex mode.
Default: [Opposite Position]
Duplex Back Page Stamping Position: T to B
You can select the position of the duplex back page number printed in Duplex mode.
Default: [Same Position]
Page Numbering in Combine
You can select page numbering when using the Combine function and the Page Numbering function together.
Default: [Per Original]
Stamp on Designating Slip Sheet
You can select whether or not to print the page number onto slip sheets when using the Designate function set to "Copy" and the Page Numbering function together.
Default: [Off]
Stamp Position
Specify how each of stamps is printed.
Stamp Position
Specify where to print the stamp. For details about the stamp position, see "Stamps", Basic Operations.
Default for the patterns of [P1,P2...], [1/5,2/5...], [P.1,P.2...], and [1,2...]: [Top Right]
Default for the patterns of [-1-,-2-...] and [1-1,1-2...]: [Bottom Center]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)Stamp positions
Default
Possible range
Top Left
12 mm from the left edge
12 mm from the top edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the top edge
Top Center
Center
12 mm from the top edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the top edge
Top Right
12 mm from the right edge
12 mm from the top edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the top edge
Bottom Left
12 mm from the left edge
8 mm from the bottom edge
From 4 to 144 mm from the left edge
From 4 to 144 mm from the bottom edge
Bottom Center
Center
8 mm from the bottom edge
From 0 to 72 mm to the right or left of the center
From 4 to 144 mm from the bottom edge
Bottom Right
12 mm from the right edge
8 mm from the bottom edge
From 4 to 144 mm from the right edge
From 4 to 144 mm from the bottom edge
(mainly North America)Stamp positions
Default
Possible range
Top Left
0.5 inches from the left edge
0.5 inches from the top edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the top edge
Top Center
Center
0.5 inches from the top edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the top edge
Top Right
0.5 inches from the right edge
0.5 inches from the top edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the top edge
Bottom Left
0.5 inches from the left edge
0.3 inches from the bottom edge
From 0.2 to 5.7 inches from the left edge
From 0.2 to 5.7 inches from the bottom edge
Bottom Center
Center
0.3 inches from the bottom edge
From 0 to 2.8 inches to the right or left of the center
From 0.2 to 5.7 inches from the bottom edge
Bottom Right
0.5 inches from the right edge
0.3 inches from the bottom edge
From 0.2 to 5.7 inches from the right edge
From 0.2 to 5.7 inches from the bottom edge
Adj. Back Side Stamp Position
You can adjust the stamp position for back side in duplex mode, within the available range as shown below.
- (mainly Europe and Asia)
Left-Right: Left 432 mm–Right 432 mm
Top-Bottom: Top 432 mm–Bottom 432 mm
Default: [0 mm]
- (mainly North America)
Left-Right: Left 17.0 inches–Right 17.0 inches
Top-Bottom: Top 17.0 inches–Bottom 17.0 inches
Default: [0.0 inch]
Superimpose
You can have page numbers printed in white when they overlap black parts of the image.
Default: [Off]
Stamp Color
You can select the priority of the colors for the page numbers.
Default: [Black]
Page Numbering Initial Letter
You can select the page numbering initial letter between [P1,P2.../P.1,P.2...] and [S1,S2.../S.1,S.2...].
Default: [P1,P2.../P.1,P.2...]
For details about how to change the Copier / Document Server Features, see "Accessing User Tools", Device Management.
