Skip header
 

Adjusting the Display

You can adjust the color, brightness and display position of the control panel screen using the display adjustment keys in the bottom right part of the control panel.

To adjust the display and unlock it, press and hold the Up and Down buttons at the same time for five seconds.

Note

  • The setting is saved automatically if you do not perform any operation for more than 10 seconds while configuring the setting.

Adjusting the Display illust

  1. Mode button

    Press this button to start or end display adjustment. This button also selects or deselects the setting item when you are adjusting the display.

  2. Up button

    Press this button to move between the setting items, or change the setting value.

    The cursor moves to the item above when moving between the items.

    The value increases when changing a setting value.

    It is also used to enable the display adjustment function.

  3. Down button

    Press this button to move between the setting items, or change the setting value.

    The cursor moves to the item below when moving between the items.

    The value decreases when changing a setting value.

    It is also used to enable the display adjustment function.

Display adjustment screen

Display adjustment screen

Setting item

Content

Setting range

Initial value

Contrast

Adjust the overall contrast of all colors in RGB

0-255

55

ContrastRed

Adjust the contrast in red (digital setting)

0-255

50

ContrastGreen

Adjust the contrast in green (digital setting)

0-255

50

ContrastBlue

Adjust the contrast in blue (digital setting)

0-255

50

Filter

Select the spatial filter setting

Non, 0-4

Non

Gamma

Specify the gamma value setting

0.1-3.0

1.0

Backlight

Adjust the brightness

0-31

24

InputSelect

Select an image source to display

DVI/RGB

DVI

OSD HPosition

Adjust the horizontal position to display the display adjustment screen (OSD)

5-253

128

OSD VPosition

Adjust the vertical position to display the display adjustment screen (OSD)

63-210

128

OSD Effect

Specify the opacity setting of the display adjustment screen (OSD)

0-7

0

OSD Timeout

Specify the time to wait before closing the display adjustment screen (OSD)

Non, 5-60*1

30

Default

Select to initialize the settings

-

-

Save Data

Select to save the data

-

-

Cancel

Select to cancel selection, or hide the display adjustment screen (OSD)

-

-

Status

Select to display the status screen

-

-

*1 Select the time from 5-10, 15, 20, 30, 40, 50 and 60.