Previous
To connect from the machine's control panel to a computer (RDP server) remotely, create a destination for the remote connection by using the following procedure:
Use the following procedure to configure a connection destination.
Press the [Home] (
) icon at the center bottom of the screen.
Press 
.
Press the [APPS] tab.
Press the [Remote Desktop] icon.
Press [Add Connection].
Specify the following items:
Host
Label
Specify the name under which to register the destination information.
Host
Specify the host name (IP address) of the destination.
Port
Specify the port number of the destination.
Default: [3389]
Credentials
Username
Enter the login user name.
Password
Enter the login password.
Domain
Enter the domain name.
Settings
Screen
Colors
Specify the display color of the screen. You can select from the following:
High Color (16 Bit)
True Color (24 Bit)
Highest Quality (32 Bit)
Default: [Highest Quality (32 Bit)]
Advanced
Enable Gateway
Specify whether or not to use the gateway.
Default: [OFF]
Gateway Settings
You can configure this setting if [Enable Gateway] is set to [ON]. You can specify the following items:
Host
Enter the host name.
Port
Enter the port number.
Default: [443]
Username
Enter the user name.
Password
Enter the password.
Domain
Enter the domain name.
Security
Specify the encryption setting.
Automatic
RDP
TLS
NLA
Default: [Automatic]
Press [Return] (
) at the bottom center of the screen.
Press [Yes] on the confirmation screen.
The settings are saved as a new destination.
Press the [Home] () icon at the center bottom of the screen.
