Previous
Paper Brand
Displays brand name and data version of the custom paper registered from the master library.
Brand name and data version is displayed only for the custom paper registered from the master library.
Manufacturer
Displays the manufacturer's name.
Paper Name
Specify the name of the custom paper using up to 38 characters.
Paper Size
Select the paper's size from the regular sizes or specify a [Custom Size].
You can specify a custom size between 100.0 and 330.2 mm (3.94 and 13.00 inches) vertically, and between 139.7 and 487.7*1 mm (5.50 and 19.20*1 inches) horizontally.
*1 If the banner sheet tray is installed, the maximum horizontal length of custom size paper is 700.0 mm (27.55 inches).
Paper Weight
Specify the weight (g/m2) of the custom paper. Specify the paper weight between [Paper Weight 1] and [Paper Weight 8]. For details about the relationship between the paper weight and ream weight, see "Paper weight", Recommended Paper Sizes and Types. Paper weight can also be scanned using the Media Identification Unit.
Paper Thickness
Specify the thickness (µm) of the custom paper. You can also scan paper thicknesses using the Media Identification Unit.
Paper Type
Specify the type of the custom paper.
Coated Paper Type
Specify whether or not the custom paper is coated. The type of coating finish (other than matte paper) can also be scanned using the Media Identification Unit.
Paper Color
Specify the color of the custom paper.
Prepunched
Specify whether or not the custom paper is punched.
Textured
Specify whether or not the custom paper is embossed.
Apply Duplex
Specify whether the duplex function is enabled for the custom paper.
Apply Auto Paper Select
Specify whether the auto paper select function is enabled for the custom paper.
Auto Adjust Image Position
Perform automatic adjustment of the print position on the front side or both sides of white custom paper allocated to the tray. Use the following procedure to perform adjustment:
When adjusting the print position on the front side, load 11 sheets of paper in the tray. Load 31 sheets when adjusting for both sides.
Press [Adjustment] for "Front Side Registration" or "Front & Back Registration".
Adjustment is performed by printing 10 sheets for adjusting the front side or 30 sheets for adjusting the front and back sides, and one sheet for confirming the adjustment result.
Check the adjustment result, and press [Apply].
The setting value that reflects the adjustment result is applied.
To check the print position only, load a sheet of paper in the tray, and then press [Test Print] under [Test Print (Front)] or [Test Print (Front & Back)].
To change the number of copies to print, change the value in [0107 Auto Adjust Image Position: No. of Printed Sheets] under [Adjustment Settings for Operators]. The result of Auto Adjust Image Position may degrade when a value smaller than the default is specified.
Adjust the print position using [Manual Adjust Image Position] or [Registration to Align Front and Back Images Using Template] when adjusting the print position on non-white custom paper, or if a satisfactory adjustment result could not be obtained using [Auto Adjust Image Position]. For details about using [Registration to Align Front and Back Images Using Template] for adjustment, see Adjusting the Image Position of Either Side of the Paper.
Manual Adjust Image Position
Adjust the print position manually on the custom paper allocated to the tray. For details, see "Adjustment Settings for Operators", Maintenance and Management.
Scan the Value
Obtain the paper weight and thickness, coating information, and identification data using the Media Identification Unit.
This item is displayed only when the Media Identification Unit is attached.
Update the Value
Obtain the identification data using the Media Identification Unit.
This item is displayed only when the Media Identification Unit is attached.
Advanced Settings
Specify the advanced settings for the paper.
Only the machine administrator can specify these settings.
Advanced settings can be changed even if the selected custom paper is assigned to a paper tray.
For details, contact your machine administrator.
You can change settings for [Paper Name], [Paper Size], [Apply Duplex], and [Apply Auto Paper Select] if a custom paper has already been registered using the master library.
Settings that you can change depend on the following:
Settings |
Custom papers that have been registered using the master library (listed with an icon |
Custom papers that have been registered by specifying paper types and weight ( |
|---|---|---|
Paper Brand |
Not Available |
- |
Manufacturer |
Not Available |
- |
Paper Name |
Available |
Available |
Paper Size |
Available |
Available |
Paper Weight |
Not Available |
Available |
Paper Thickness |
Not Available |
Available |
Paper Type |
Not Available |
Available |
Coated Paper Type |
Not Available |
Available |
Paper Color |
Not Available |
Available |
Prepunched |
Not Available |
Available |
Textured |
Not Available |
Available |
Apply Duplex |
Available |
Available |
Apply Auto Paper Select |
Available |
Available |
Scan the Value |
Available |
Not Available |
Update the Value |
Available |
Available |
Advanced Settings |
Available*1 |
Available*1 |
or 
)
)*1 Can be changed only by the machine administrator.
Before changing these settings, check that the size and type of your paper are compatible with the paper tray that you want to load the paper in. Tray compatibility depends on the paper's size and type.
