Skip header
 

Specifying the original and copy orientation

Select the orientation of the originals and copies if the original is two-sided or if you want to copy onto both sides of the paper.

1Press [Orientation].

2Select [Top to Top] or [Top to Bottom] for [Original:] if the original is two-sided.

Operation panel screen illustration

3Select [Top to Top] or [Top to Bottom] for [Copy:].

4Press [OK].

Note

  • The default is [Top to Top]. You can change the default orientation under [Original Orientation in Duplex Mode] and [Copy Orientation in Duplex Mode] in User Tools. For details about these settings, see "General Features", Preparation.