Skip header
 

Interrupt copy

Use this function if you want to interrupt a long copy job to make urgently needed copies.

Important

  • You cannot use the Staple function with this function if another copy job is already using the Staple function.

1Press [Interrupt].

2Remove the originals that were being copied.

3Place the originals you want to copy.

4Press the [Start] key.

The machine starts making copies.

5When copying is complete, remove the originals and copies.

6Press [Interrupt] again.

7Replace the originals that you were copying, and then press the [Start] key.

Follow the instructions on the screen.

Note

  • The previous copy job settings are restored. Simply press the [Start] key to continue copying from where it left off.