Top Page > Specifications > Specifications > Specifications for the Main Unit

Specifications for the Main Unit

PreviousNext

Configuration:

Console

Hard disk:

320 GB × 2

Photosensitivity type:

OPC drum

Print process:

Dry electrostatic transfer system

Development:

Dry two-component magnetic brush development system

Fusing:

Oilless belt fusing

Resolution:

2,400 × 4,800 dpi

Warm-up time (23°C (73.4°F), rated voltage)

296 seconds

Paper size:

Trays 1–2:
For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex:
A3, A4, A5, B4 JIS, B5 JIS, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13,
8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂,
5¹/₂ × 8¹/₂, 8K, 16K, 12 × 18, 11 × 15, 11 × 14, 10 × 15, 10 × 14,
13 × 18, SRA3, SRA4, 8¹/₂ × 13²/₅
Duplex (custom size):
Vertical: 139.7–330.2 mm (5.50–13.00 inches)
Horizontal: 200.0–487.7 mm (7.87–19.20 inches)

Paper weight:

Trays 1–2: For details, see "Recommended Paper Sizes and Types", Preparation.
Duplex: 52.3–300.0 g/m² (14.0 lb. Bond–165.0 lb. Index)

First print time (Full Color/B&W):

11 seconds

(A4, 8¹/₂ × 11, feeding from Tray 1)

Print speed (Full Color / B&W):

Type 1 and 2:
85 sheets/minute (A4, 8¹/₂ × 11)
Type 3 and 4:
95 sheets/minute (A4, 8¹/₂ × 11)

Zoom:

From 25–400% in increments of 1%

Maximum continuous print run:

9,999 sheets

Paper capacity (80 g/m², 20 lb. Bond):

For details, see "Recommended Paper Sizes and Types", Preparation.

Power requirements:

(mainly Europe and Asia)
220–240 V, 25 A (16 A × 2), 50/60 Hz
(mainly North America)
208–240 V, 24 A (16 A × 2), 50/60 Hz

Power consumption:

(mainly Europe and Asia)

Main unit only

	Type 1	Type 2	Type 3	Type 4
Ready	316.8 W	316.8 W	322.5 W	322.5 W
During printing	1837.9 W	1837.9 W	1961.5 W	1961.5 W
Maximum	4314.3 W or less	4314.3 W or less	4316.3 W or less	4316.3 W or less

The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

Complete system

Type 1

Type 2

Type 3

Type 4

Maximum

4362.3 W

4362.3 W

4364.3 W

4364.3 W

The complete system consists of the main unit, multi bypass tray (tray A), three-tray wide large capacity tray, interposer, Finisher SR5050, and Fiery controller.

	Type 1	Type 2	Type 3	Type 4
Maximum	4362.3 W	4362.3 W	4364.3 W	4364.3 W

(mainly North America)

Main unit only

	Type 1	Type 2	Type 3	Type 4
Ready	316.9 W	316.9 W	313.4 W	313.4 W
During printing	1845.3 W	1845.3 W	1877.0 W	1877.0 W
Maximum	4614.7 W or less	4614.7 W or less	4623.0 W or less	4623.0 W or less

The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

Regarding switching to Off mode based on the Weekly Timer's event setting
Weekly Timer is a function that allows you to set the time to switch to and recover from Sleep mode or Off mode as an event each day.
By using the Weekly Timer to set to Off mode as a daily event, the power will be turned off automatically and can provide energy consumption of 1W or less.
In order to change the settings, refer to the manuals for your product.
When the Weekly Timer is set to Off mode as a daily event, the network function is disabled, thus the factory-set default value for the Weekly Timer is [Inactive].

Complete system

Type 1

Type 2

Type 3

Type 4

Maximum

4662.7 W

4662.7 W

4671.0 W

4671.0 W

The complete system consists of the main unit, multi bypass tray (tray A), three-tray wide large capacity tray, interposer, Finisher SR5050, and Fiery controller.

	Type 1	Type 2	Type 3	Type 4
Maximum	4662.7 W	4662.7 W	4671.0 W	4671.0 W

Dimensions (W × D × H up to the top of the toner feed port (excluding the control panel and the attention light)):

1,320 × 910 × 1,218 mm (52.0 × 35.9 × 48.0 inches)

Space for main unit (W × D):

1,320 × 910 mm (52.0 × 35.9 inches)

Noise emission:

Sound power level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Stand-by
  
  58.5 dB (A)
  
  58.5 dB (A)
  
  58.5 dB (A)
  
  58.5 dB (A)
  
  Printing
  
  78.5 dB (A)
  
  78.5 dB (A)
  
  78.5 dB (A)
  
  78.5 dB (A)
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Stand-by
  
  61.0 dB(A)
  
  61.0 dB(A)
  
  61.0 dB(A)
  
  61.0 dB(A)
  
  Printing
  
  81.5 dB(A)
  
  81.5 dB(A)
  
  81.5 dB(A)
  
  81.5 dB(A)
Sound pressure level:
- Main unit only
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Stand-by
  
  52.5 dB (A)
  
  52.5 dB (A)
  
  52.5 dB (A)
  
  52.5 dB (A)
  
  Printing
  
  68.5 dB (A)
  
  68.5 dB (A)
  
  68.5 dB (A)
  
  68.5 dB (A)
- Complete system
  
  Type 1
  
  Type 2
  
  Type 3
  
  Type 4
  
  Stand-by
  
  55.0 dB(A)
  
  55.0 dB(A)
  
  55.0 dB(A)
  
  55.0 dB(A)
  
  Printing
  
  72.5 dB(A)
  
  72.5 dB(A)
  
  72.5 dB(A)
  
  72.5 dB(A)

	Type 1	Type 2	Type 3	Type 4
Stand-by	58.5 dB (A)	58.5 dB (A)	58.5 dB (A)	58.5 dB (A)
Printing	78.5 dB (A)	78.5 dB (A)	78.5 dB (A)	78.5 dB (A)

	Type 1	Type 2	Type 3	Type 4
Stand-by	61.0 dB(A)	61.0 dB(A)	61.0 dB(A)	61.0 dB(A)
Printing	81.5 dB(A)	81.5 dB(A)	81.5 dB(A)	81.5 dB(A)

	Type 1	Type 2	Type 3	Type 4
Stand-by	52.5 dB (A)	52.5 dB (A)	52.5 dB (A)	52.5 dB (A)
Printing	68.5 dB (A)	68.5 dB (A)	68.5 dB (A)	68.5 dB (A)

	Type 1	Type 2	Type 3	Type 4
Stand-by	55.0 dB(A)	55.0 dB(A)	55.0 dB(A)	55.0 dB(A)
Printing	72.5 dB(A)	72.5 dB(A)	72.5 dB(A)	72.5 dB(A)

Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, two-tray wide large capacity tray, decurl unit, buffer pass unit, interposer, multi-folding unit, ring binder, high capacity stacker, Finisher SR5050, and trimmer.

Weight:

Type 1 and 3
Approx. 580 kg (1278.7 lb.)
Type 2 and 4
Approx. 600 kg (1322.8 lb.)

We have obtained each author's permission for the use of applications including open-source software applications. For details about the copyright information for these software applications, see the file in the OSS folder on the CD-ROM supplied with the machine.