Previous
|
To prevent faults, do not use any of the following kinds of treated paper:
Paper for inkjet printers
Thermal paper
Art paper
Aluminum foil
Carbon paper
Conductive paper
Paper with perforated lines
Hemmed-edge paper
If you use metallic/pearl paper or black paper, the conductivity of the paper may affect the machine. Use only paper that has been verified. If any problem occurs, stop feeding the paper immediately and contact your service representative.
Faults can occur if you print onto sides that are already printed. Take care to print onto unprinted sides only.
Certain types of transparencies for color printing cannot be used. For details about types that can be used, contact your sales or service representative.
To prevent misfeeds, do not use the following kinds of paper:
Bent, folded, or creased paper
Torn paper
Paper with a dusty surface
The following paper types are not supported by the perfect binder and the interposer.
Heavily curled paper
Paper with staples or clips
Torn paper
Cardstock
Paper with penciled characters or images
Folded paper
Label paper*1
Tab stock*1
Even supported types of paper may cause paper jams or malfunctions if the paper is not in good condition.
If you print onto rough grain paper, the output image might be blurred.
Do not load sheets that have already been printed onto by another machine. (Sheets can become jammed if they have been improperly stored.)
Some kinds of colored paper cannot be used depending on the color of the paper. For details, contact your local dealer or service representative.
*1 These are supported by Interposer CI5040.
