Skip header
 

Precautions for Changing the Paper Size

CAUTION


  • When replacing paper or removing jammed paper, make sure not to trap or injure your fingers.

Important

  • Do not stack paper over the limit mark.

  • Do not change the size of the paper for the specified printing tray while documents are being printed.

Note

  • Region A icon(mainly Europe and Asia)
    Tray 1 can hold A4Portrait paper only. If you want to print on other paper sizes from Tray 1, contact your service representative.

  • Region B icon(mainly North America)
    Tray 1 can hold 81/2 × 11Portrait paper only. If you want to print on other paper sizes from Tray 1, contact your service representative.

  • Region A icon(mainly Europe and Asia)
    A3/11 × 17 tray unit can hold A3Landscape paper only. If you want to print on other paper sizes from A3/11 × 17 tray unit, contact your service representative.

  • Region B icon(mainly North America)
    A3/11 × 17 tray unit can hold 11 × 17Landscape paper only. If you want to print on other paper sizes from A3/11 × 17 tray unit, contact your service representative.

  • After loading paper whose sizes are not detected automatically, be sure to specify the appropriate paper size in [Tray Paper Settings]. If you do not, misfeeds might occur. For details, see Changing to a Size That Is Not Automatically Detected.

  • To prevent multiple sheets from being fed at once, fan the paper before loading.

  • Straighten curled or warped paper before loading.

  • For details about the paper sizes and types that can be used, see Recommended Paper Sizes and Types.