Previous
If the items "Remote Operation/Monitoring Functions" and password setting are not displayed, consult your sales or service representative.
Press the [Home] (
) icon at the center bottom of the screen.
Press the [User Tools] (
) icon in the Home screen.
Press [Basic Settings for Extended Devices].
Press [Remote Panel Operation].
Set [Remote Operation/Monitoring Functions] to [ON].
Configure other items as necessary.
Remote Operation/Monitoring Functions
Specify whether or not to enable the remote operation and monitoring functions.
Default: [OFF]
Remote Connection URL
The URL (IP address and port) is displayed when Remote Panel Operation/Monitoring is enabled.
Activate Monitoring Password
Select this check box to enable the password settings of the administrator to connect to the machine for monitoring.
Set Monitoring Password
Enter the password for monitoring the machine.
You can enter up to 8 half-width characters combining a-z, A-Z and 0-9.
You cannot monitor the machine unless specifying the password.
Activate Remote Operation Password
Select this check box to enable the password settings of the administrator to connect to the machine for remote operations.
Set Remote Operation Password
Enter the password for operating the machine remotely.
You can enter up to 8 half-width characters combining a-z, A-Z and 0-9.
You cannot operate the machine remotely unless specifying the password.
Set Remote Connection Timeout
If the administrator establishes a remote connection with the machine but performs no remote operation for the specified duration, the connection with the administrator will be terminated automatically. Specify a value between 3 and 60 minutes.
Default: [30 minutes]
Press the [Home] () icon at the center bottom of the screen.
