Previous
The following shows the recommended print area for this machine.
Print area
Feed direction
Left margin (varies depending on the paper type)
Non-coated paper:
Approx. 5.0 ± 0.5 mm (0.2 ± 0.02 inches) for paper weight 1 to 3, and approx. 4.0 ± 0.5 mm (0.16 ± 0.02 inches) for paper weight 4 to 8
Coated paper:
Approx. 7.0 ± 0.5 mm (0.28 ± 0.02 inches) for paper weight 2, approx. 5.0 ± 0.5 mm (0.2 ± 0.02 inches) for paper weight 3, and approx. 4.0 ± 0.5 mm (0.16 ± 0.02 inches) for paper weight 4 to 8
Right margin (varies depending on the paper type)
Non-coated paper:
Approx. 5.0 ± 1.0 mm (0.2 ± 0.04 inches) for paper weight 1 to 3, and approx. 4.0 ± 1.0 mm (0.16 ± 0.04 inches) for paper weight 4 to 8
Coated paper:
Approx. 7.0 ± 1.0 mm (0.28 ± 0.04 inches) for paper weight 2, approx. 5.0 ± 1.0 mm (0.2 ± 0.04 inches) for paper weight 3, and approx. 4.0 ± 1.0 mm (0.16 ± 0.04 inches) for paper weight 4 to 8
Top margin
Approx. 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
Bottom margin
Approx. 2.0 ± 1.5 mm (0.08 ± 0.06 inches)
The print area may vary depending on the paper size, printer language and printer driver settings.
Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not come out as desired, or a paper feed problem may occur.
If Edge to Edge Print function is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. However, toner smearing may occur on the back side or near the edges of the printed paper.
