Previous
When printing in an environment where classification codes are required, a classification code must be specified for each print job.
The specified classification code is stored in the printer driver.
To switch between different classification codes, install the printer driver under different names, and specify different classification code for each driver.
When using the PCL 6 printer driver
Click the WordPad menu button in the upper left corner of the window, and then click [Print].
Select the printer you want to use.
Click [Preferences].
Click the [Detailed Settings] tab.
In the "Menu:" box, click [Job Setup].
Enter the classification code in the "Classification Code:" box.
Change any other print settings if necessary.
Click [OK].
Start printing from the application's [Print] dialog box.
When using the PCL 5c printer driver
Click the WordPad menu button in the upper left corner of the window, and then click [Print].
Select the printer you want to use.
Click [Preferences].
Click the [Valid Access] tab.
Enter the classification code in the "Classification Code:" box.
Change any other print settings if necessary.
Click [OK].
Start printing from the application's [Print] dialog box.
If you are printing on a registered custom paper, make the correct paper settings for the custom paper on the printer driver. For details about custom paper, see "Registering a Custom Paper", Preparation.
