Previous
For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see Programming the LDAP Server.
When [Do not Specify] is selected for LDAP Authentication, the User Name and Password that you have specified in Program / Change / Delete LDAP Server of Administrator Tools settings are applied. For details, see Programming the LDAP Server.
If User Authentication is specified, contact your administrator.
Press [Home] (
) at the bottom of the screen in the center.
Flick the screen to the left, and then press the [Address Book Management] icon.
Press [Change].
Select the item you want to display from [All Users], [User Code], [Fax Dest.], [Email] and [Folder].
Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.
Press [Auth. Info].
Press [LDAP Authentication].
Press [Specify Other Auth. Info] under "LDAP Authentication".
Press [Change] to the right of [Login User Name].
Enter the login user name, and then press [OK].
Press [Change] to the right of [Login Password].
Enter the password, and then press [OK].
Enter the password again to confirm, and then press [OK].
Press [OK].
Press [User Tools] (
).
Press [Home] () at the bottom of the screen in the center.
To register the name, see Registering User Information.
You can enter up to 128 characters for user name and password.
