Current Machine Status

Adjusting…

The machine is initializing or calibrating.

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Check Paper: Bypass Tray

Check that the paper size, orientation, and paper type are correct.

Configuring...

Setting is being changed.

Cover Open: Front Cover

The front cover is open.

Cover Open: Rear Cover

The rear cover is open.

Current Job Suspended

The current job is suspended.

Empty: Black Toner

The black toner cartridge is almost empty.

Energy Saver Mode

The machine is in Sleep mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: PDL

An error has occurred in the page description language.

Error: Rem. Certificate Renewal

An error has occurred in the remote server renewal.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Card

There is a problem with IEEE802.11a/b/g/n interface unit or it is not supported.

Full: Standard Tray

The standard tray is full.

Full: Waste Toner

The waste toner is full.

Hex Dump Mode

It is a hex dump mode.

In Use: Input Tray

Other function is using the input tray.

Independent-supplier Toner

Toner that is not recommended is set.

Jobs Suspended

All jobs are suspended.

Loading Toner…

Toner is being supplied.

Low: Toner

The toner cartridge is not set correctly, or toner is almost running out.

Malfunction: Bypass Tray

There is a problem with the bypass tray.

Malfunction: Tray 1

There is a problem with Tray 1.

Malfunction: Tray 2

There is a problem with Tray 2.

Malfunction: Ext. Charge Unit

There is a problem with the external charge unit.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Size/Image Size

The paper size fed from a paper tray does not match the image size.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

Near Replacing: Drum Unit

It is close to replacing the drum unit.

Near Replacing: Maintenance Kit

It is close to replacing the maintenance kit.

Nearly Full: Waste Toner

Waste toner is nearly full.

No Paper: Selected Tray

There is no paper in specified tray.

Not Detected: Drum Unit

The drum unit is not correctly set.

Not Detected: Fusing Unit

The fusing unit does not exist or is not correctly set. The fusing unit that is not recommended is set.

Not Detected: Input Tray

The tray selected when printing is performed does not exist or is not correctly set.

Not Detected: Toner Cartridge

The toner cartridge is not correctly set.

Offline

Machine is offline.

Paper Misfeed: Input Tray

The paper has jammed in the paper trays, bypass tray or lower paper trays.

Paper Misfeed: Internal/Output

The paper has jammed in the internal paper feed part.

Paper Misfeed: Optional Tray 1

The paper has jammed in the lower paper tray (tray 2).

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

Replace Drum Unit

It is time to replace the drum unit.

Replace Maintenance Kit

It is time to replace the maintenance kit.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.