Previous
This section describes the parameters that can be set on [Maintenance].
Adjust Print Position
You can select the start position for printing on a page.
Only the installed trays appear on the display panel.
Bottom : Tray 1
Bottom : Tray 2
Bottom : Bypass Tray
Bottom : Back Side
Left : Tray 1
Left : Tray 2
Left : Bypass Tray
Left : Back Side
Replacement Alert
You can specify when the machine prompts the user to replace supplies.
Supply End Option
You can specify whether or not to continue printing after the fusing unit, intermediate transfer unit, and drum unit exceed their service life.
You can also specify this setting using print application.
Default: [Continue Printing]
Continue Printing
Stop Printing
Color Registration
Default: [Normal]
Notify Sooner
Normal
Notify Later
Cleaning
You can clear the intermediate transfer unit when white lines appear on printouts.
Low Speed Printing (Thick Paper)
You can specify whether or not to lower the print speed of pages on thick paper if lateral streaks appear on the output. Enabling this setting prevents streaks from appearing on the output by lowering the print speed.
If this function is enabled, the lifetime of the toner and drum unit becomes shorter than their normal lifetime.
Default: [Inactive]
Curl Prevention
You can control the fuser temperature to prevent paper from curling. Enabling this function may increase the print time and speed for first prints.
Also, the lifetime of the drum unit, intermediate transfer unit, and fusing unit becomes shorter than their normal lifetime.
Default: [Inactive]
Anti-droplet (2 Sided Print)
You can specify whether or not to dry the duplex unit before printing to prevent partial dropouts of printed images on the back sides of two-sided printouts. Enabling this function may increase the print time for duplex printing of first prints. Also, the lifetime of the fusing unit becomes shorter than their normal lifetime.
Default: [Inactive]
Anti-humidity (Image Dropout Prevention)
You can specify whether or not to prevent partial dropouts of printed images when printing in a high humidity environment.
Default: [Inactive]
Black & White Print Priority
You can specify whether or not to reduce the consumption of color toner. When this function is enabled, it may take longer to start printing a color page.
Default: [Off]
Black & White Page Detect
You can specify whether to recognize black-and-white images by page or by document. The black-and-white recognition function allows the printer to print monochrome images in monochrome mode even if color printing is specified.
Default: [Per Job]
